Preparation and Characterization of Ceramic Membrane Composition Variations in Pome Waste Treatment

Authors

  • Isnandar Yunanto Politeknik Negeri Sriwijaya
  • Idha Silviyati Politeknik Negeri Sriwijaya
  • Lian Elvani Politeknik Negeri Sriwijaya
  • Lety Trisnaliani Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.34306/att.v4i3.273

Keywords:

POME, Wastewater treatment, Preparation, Characterization, Ceramic membrane

Abstract

Palm Oil Mill Effluent (POME) is waste generated by the palm oil industry consisting of solid, liquid and gaseous wastes. POME is decomposed in sewage ponds and allowed to decompose naturally. The residual waste generated by this industry is non-toxic but has high polluting power. To overcome this, it is necessary to treat waste by making ceramic membranes. The composition materials needed are clay, zeolite, sodium carbonate and boric acid. The manufacturing method is through the printing and combustion stages at a temperature of 900oC. The results showed that there was an effect of compositional variations on the quality of the final product, namely TSS rejection % 93.355 with a flux value of 0.2474 (L/m2min). From the parameter values obtained, it proves that the ceramic membrane is able to process POME with satisfactory effective results. The quality standard of palm oil liquid waste is in accordance with South Sumatera governor regulation number 8 of 2012 concerning quality standard of liquid waste for industrial, hotel, hospital, domestic and coal mining activities

References

M. Ben Hamden and J. Bouaziz, “Preparation and characterization of tubular cermet membrane for microfiltration separation: application to the treatment of textile wastewater,” Comptes Rendus. Chim., vol. 24, no. 1, pp. 135–146, 2021.

A. Abdullayev, M. F. Bekheet, D. A. H. Hanaor, and A. Gurlo, “Materials and applications for low-cost ceramic membranes,” Membranes (Basel)., vol. 9, no. 9, p. 105, 2019.

S. L. S. Rani and R. V. Kumar, “Insights on applications of low-cost ceramic membranes in wastewater treatment: A mini-review,” Case Stud. Chem. Environ. Eng., vol. 4, p. 100149, 2021.

G. G. Wiguna, K. Darkun, and K. Sulistyadi, “SAST & AHP METHOD IN DETERMINING THE BEST STRATEGY OF OFFICE ERGONOMICS PROGRAM IMPROVEMENT TO PREVENT RISK OF MUSCULOSKELETAL DISORDERS AT XYZ COMPANY QATAR,” ADI J. Recent Innov., vol. 2, no. 1, pp. 7–14, 2020.

F. Mansour, M. Al-Hindi, R. Yahfoufi, G. M. Ayoub, and M. N. Ahmad, “The use of activated carbon for the removal of pharmaceuticals from aqueous solutions: a review,” Rev. Environ. Sci. Bio/Technology, vol. 17, no. 1, pp. 109–145, 2018.

S. Mohammad, S. Baidurah, T. Kobayashi, N. Ismail, and C. P. Leh, “Palm oil mill effluent treatment processes—a review,” Processes, vol. 9, no. 5, p. 739, 2021.

B. T. Duy Nguyen, H. Y. Nguyen Thi, B. P. Nguyen Thi, D.-K. Kang, and J. F. Kim, “The Roles of Membrane Technology in Artificial Organs: Current Challenges and Perspectives,” Membranes (Basel)., vol. 11, no. 4, p. 239, 2021.

M. Maruf, R. Subagyo, and H. Isworo, “Kajian Eksperimental Dan Simulasi Cross Flow Reversal Pada Proses Filtrasi Membran,” Elem. J. Tek. Mesin, Vol. 8, No. 2, Pp. 123–131, 2021.

J. A. Pinem, I. Tumanggor, and E. Saputra, “The Application of Nanofiltration Membrane for Palm Oil Mill Effluent Treatment by Adding Polyaluminium Chloride (PAC) as Coagulant,” J. Rekayasa Kim. Lingkung., vol. 15, no. 1, pp. 1–9, 2020.

Q. Song, X. Chen, W. Zhou, and X. Xie, “Application of a Spiral Symmetric Stream Anaerobic Bioreactor for treating saline heparin sodium pharmaceutical wastewater: Reactor operating characteristics, organics degradation pathway and salt tolerance mechanism,” Water Res., vol. 205, p. 117671, 2021.

Downloads

Published

2022-10-06

How to Cite

Isnandar Yunanto, Silviyati, I., Elvani, L., & Trisnaliani, L. (2022). Preparation and Characterization of Ceramic Membrane Composition Variations in Pome Waste Treatment. Aptisi Transactions on Technopreneurship (ATT), 4(3), 285–291. https://doi.org/10.34306/att.v4i3.273

Issue

Section

Articles