Control Led Through Internet Based On Nodemcu With Blynk Application

Abstract

Abstract


   Internet (interconnected-networking) is a series of computers that are connected globally in several circuits and use TCP / IP as packet exchange communication protocol. The internet as part of the technological development that is very rapidly developing in people's lives today has been able to be used as a medium of communication and control of devices from a distance as long as they are still connected to each other. The internet is like virtual threads that connect with one another, forward data and convey data from one point to another. However, along with the development of increasingly advanced science and technology, the internet is no longer just to connect between humans but also to control between any object that can be connected. In this study there were 3 (three) problems and 3 (three) problem solving methods Electronic device control in the form of LED lights using an IoT platform that is open source. This study uses the NodeMCU module as a station, which will be controlled by the Blynk application with an internet connection. In this study using the NodeMCU module as a station, which will be controlled by the Blynk application by connecting to the internet.

Article Details

How to Cite
Asmawati, A., Putra, F., & Richie, L. (2019). Control Led Through Internet Based On Nodemcu With Blynk Application. Aptisi Transactions On Technopreneurship (ATT), 1(2), 170-179. https://doi.org/https://doi.org/10.34306/att.v1i2.79
Section
Articles

References

[1]Rio Fernando, Ignatius Prasetya Dwi Wibawa, Cahyantari Ekaputri. 2018. Sistem Kendali dan Monitor Penggunaan Daya Listrik Pada Perangkat Listrik Rumah Berbasis IoT. Fakultas Teknik Elektro, Universitas Telkom.

[2]Ahmad Fauzan Jaya, Muhammad Ary Murti, Ratna Mayasari. 2018. Monitoring dan Kendali Perangkat pada Ruang Kelas Berbasis Internet Of Things (IOT).

[3]Achmad Muzakky, Akhmad Nurhadi, Ashuri Nurdiansyah, Galih Wicaksana, Istiadi. 2018. Perancangan Sistem Deteksi Banjir Berbasis IoT. Universitas Widyagama Malang.

[4]Rometdo Muzawi, Wahyu Joni Kurniawan. 2018. Rancang Bangun Pengontrolan Lampu Berbasis Internet of Things Menggunakan Raspberry Pi. Manajemen Informatika, STMIK Amik Riau.

[5]Monica Roselina, Muhammad Pachroni Suryana, Eko Sulistyo, Parulian Silalahi. 2018. Pengontrolan Robot Lengan Pada Aplikasi Android Via WiFi. Politeknik Manufaktur Negeri Bangka Belitung.

[6] Rahardja, U., Saefullah, A. and Ramdani, M., Simulasi Sistem Kendali Kecepatan Mobil Secara Otomatis.

[7] Budi Artono, Rakhmad Gusta Putra. 2017. Penerapan Internet of Things (IOT) Untuk Kontrol Lampu Menggunakan Arduino Berbasis Web.

[8] Azharul Fuad. Sistem Monitoring Pergerakan Objek Pada Ruangan Menggunakan Aplikasi Blynk (Mahasiswa Universitas Raharja).

[9].Ariefcha Anugrah Adi Wibowo 2018. Sistem Kendali dan Monitoring Peralatan Elektronik Berbasis NodeMCU ESP8266 dan Aplikasi blynk. Proyek Akhir Mahasiswa Sekolah Tinggi Manajemen Informatika dan Komputer AKAKOM Yogyakarta.

[10]Anggy F atillah. Prototype Sistem Pengontrolan dan Monitoring Rumah Pintar Menggunakan Aplikasi Blynk Berbasis Raspberry PI 3 Pada Perguruan Tinggi.

[11]Arafat, A. (2017). DESAIN DAN IMPLEMENTASI SISTEM SMART HOME BERBASIS WI-FI. AL ULUM JURNAL SAINS DAN TEKNOLOGI , 2 (2).

[12]Ramadhan, R. 2012. PENDETEKSI OBYEK DI DALAM RUANGAN MENGGUNAKAN SENSOR INFRA MERAH.

[13]Fina Supegina, Eka Jovi Setiawan. 2017. Rancang Bangun IOT Temperature Controller Untuk Enclosure BTS Berbasis Microcontroller Wemos dan Android.

[14]Wagyana, A., & Zulhelman, Z. 2016. PROTOTIPE SMART POWER OUTLET UNTUK PENCEGAH KEBAKARAN AKIBAT ARUS LISTRIK.

[15]Nur Yogi. 2017. Sistem Peringatan Dini Banjir Berbasis Protocol MQTT Menggunakan NodeMCU ESP8266. STMIK AKAKOM Yogyakarta.

[16]Jimy Harto Saputro, Tejo Sukmadi, Karnoto Karnoto. 2013. Analisa Penggunaan Lampu LED Pada Penerangan Dalam Rumah. Teknik Elektro Fakultas Teknik, Universitas Diponegoro.

[17]Embeddednesia, NodeMCU, https://embeddednesia.com/v1/tutorial-nodemcu-pertemuan-pertama/.