Moderating Effect of Perceived Organizational Support on the Relationship Between Employee Performance and Its Determinants: A Case of Entrepreneurial Firms in UAE
DOI:
https://doi.org/10.34306/att.v6i2.425Keywords:
Customer Satisfaction, Ethical Sales Behaviour, Customer Loyalty, Green Experience, Perceived TrustAbstract
Considering the organizational success, employees performance has been accepted as among the fundamental role players. However, several organizational factors like abusive supervision, job stress, turnover intention, and agile leadership have been accepted as among the most critical determinants of such performance outcomes. The objective of this study is to assess the moderating effect of perceived organizational support on the relationships among abusive supervision, job stress, turnover intention, and agile leadership on employee performance in public firms in the UAE. A valid sample of 211 respondents from the public sector firms in UAE has been collected. The present study applies the measurement model and structural model assessment using the Smart PLS version 4. The findings confirm the presence of the internal consistency reliability, convergent validity, and discriminant validity of the latent constructs when examined through their relative items. Moreover, the structural equation modelling reveals that there is a significant impact of agile leadership, abusive supervision, and job stress on the employee performance among the public firms of UAE. Additionally, the findings state that there is a significant moderating effect of perceived organizational support on the relationship between agile leadership and employee performance, between abusive supervision and employee performance, and between job stress and employee performance, respectively. Based upon the given findings, several policy implications have also been suggested for the policymakers specifically at the public firms in UAE.
References
D. Alarcon, J. A. S ́ anchez, and U. De Olavide, “Assessing convergent and discriminant validity in the ́adhd-r iv rating scale: User written commands for average variance extracted (ave), composite reliability (cr), and heterotrait-monotrait ratio of correlations (htmt),” in Spanish STATA meeting, vol. 39, 2015, pp. 1–39.
G. Ahmed, “Students’ perception of e-learning during the covid pandemic: a fresh evidence from united arab emirates (uae),” Journal of E-learning and Knowledge Society, vol. 17, no. 3, 2021.
T. Anning-Dorson, “Interactivity innovations, competitive intensity, customer demand and performance,” International Journal of Quality and Service Sciences, vol. 8, no. 4, pp. 536–554, 2016.
J.-H. Cheah, R. Thurasamy, M. A. Memon, F. Chuah, and H. Ting, “Multigroup analysis using smartpls: Step-by-step guidelines for business research,” Asian Journal of Business Research, vol. 10, no. 3, pp. I–XIX, 2020.
W. W. Chin et al., “The partial least squares approach to structural equation modeling,” Modern methods for business research, vol. 295, no. 2, pp. 295–336, 1998.
A. A. Said, H. R. HassabElnaby, and B. Wier, “An empirical investigation of the performance consequences of nonfinancial measures,” Journal of management accounting research, vol. 15, no. 1, pp. 193– 223, 2003.
L. J. Gitman, R. Juchau, and J. Flanagan, Principles of managerial finance. Pearson Higher Education AU, 2015.
A. Leguina, “A primer on partial least squares structural equation modeling (pls-sem),” 2015.
J. F. Hair, J. J. Risher, M. Sarstedt, and C. M. Ringle, “When to use and how to report the results of pls-sem,” European business review, vol. 31, no. 1, pp. 2–24, 2019.
J. Henseler, C. M. Ringle, and M. Sarstedt, “A new criterion for assessing discriminant validity in variance based structural equation modeling,” Journal of the academy of marketing science, vol. 43, pp. 115–135, 2015.
N. Kock, “Advanced mediating effects tests, multi-group analyses, and measurement model assessments in pls-based sem,” International Journal of e-Collaboration (ijec), vol. 10, no. 1, pp. 1–13, 2014.
J. Moonen-van Loon, K. Overeem, H. Donkers, C. Van der Vleuten, and E. Driessen, “Composite reliability of a workplace-based assessment toolbox for postgraduate medical education,” Advances in Health Sciences Education, vol. 18, pp. 1087–1102, 2013.
Division for Sustainable Development Goals Department of Economic and Social Affairs United Nations, “Sustainable development goals un.” [Online]. Available: https://sdgs.un.org/goals
THE WORLD BANK, “Sustainable development goals sdg.” [Online]. Available: https://www.worldbank.org/en/programs/sdgs
——, “Our world in data : The united nations sustainable development goals (sdgs).” [Online]. Available:
https://ourworldindata.org/sdgs
N. P. L. Santoso, R. A. Sunarjo, and I. S. Fadli, “Analyzing the factors influencing the success of business incubation programs: A smartpls approach,” ADI Journal on Recent Innovation, vol. 5, no. 1, pp. 60–71, 2023.
A. Abudaqa, S. Al Nuaimi, H. Buhazzaa, and S. Al Hosani, “Examining the significance of internal mobility hiring in determining the individual vs organizational outcomes: An empirical investigation from adnoc fursa platform during recent pandemic of covid-19,” in Abu Dhabi International Petroleum Exhibition and Conference. SPE, 2021, p. D031S080R001.
D. R. A. Permana, M. Fahrulrozi, A. Ismono, and R. T. Ningrum, “Implementasi graphic rating scale dalam menentukan prioritas indent motor pada dealer sepeda motor: Implementation of the graphic rating scale in determining motorcycle indent priorities at motorcycle dealers,” Technomedia Journal, vol. 9, no. 1, pp. 76–91, 2024.
N. S. Ainy, I. Mujadid, N. Hadi, and L. Sjahfirdi, “Increase in the abundance of invasive fish species in the ciliwung river, dki jakarta and west java provinces,” ADI Journal on Recent Innovation, vol. 6, no. 1, pp. 17–31, 2024.
M. F. Rosmawati, “Pengembangan video informasi cara mengenakan pakaian toga dan prosesi wisuda pada universitas raharja,” ADI Pengabdian Kepada Masyarakat, vol. 3, no. 2, pp. 146–153, 2023.
I. Maria et al., “Unlocking success: Human resource management for startupreneur,” Startupreneur Business Digital (SABDA Journal), vol. 3, no. 1, pp. 89–97, 2024.
P. Wells, G. Probert, D. Marke, and C. Konopka, “Position paper on applications of smart contracts and blockchain technology,” Blockchain Frontier Technology, vol. 3, no. 1, pp. 48–53, 2023.
P. A. Sunarya, U. Rahardja, S. C. Chen, Y.-M. Lic, and M. Hardini, “Deciphering digital social dynamics: A comparative study of logistic regression and random forest in predicting e-commerce customer behavior,” Journal of Applied Data Sciences, vol. 5, no. 1, pp. 100–113, 2024.
U. Rahardja, Q. Aini, A. S. Bist, S. Maulana, and S. Millah, “Examining the interplay of technology readiness and behavioural intentions in health detection safe entry station,” JDM (Jurnal Dinamika Manajemen), vol. 15, no. 1, pp. 125–143, 2024.
T. Ramayah, “Factors influencing the effectiveness of information system governance in higher education institutions (heis) through a partial least squares structural equation modeling (pls-sem) approach,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 5, no. 2, pp. 100–107, 2024.
A. Ruangkanjanases, A. Khan, O. Sivarak, U. Rahardja, and S.-C. Chen, “Modeling the consumers’ flow experience in e-commerce: The integration of ecm and tam with the antecedents of flow experience,” SAGE Open, vol. 14, no. 2, p. 21582440241258595, 2024.
W. Warta, K. Sulastriningsih, and D. Umronih, “Implementasi sistem penjaminan mutu internal (spmi) dalam meningkatkan mutu layanan pendidikan: Implementation of the internal quality assurance system (spmi) in improving the quality of education services,” Technomedia Journal, vol. 9, no. 1, pp. 17–30, 2024.
R. Aprianto, A. Famalika, I. Idayati, I. N. Hikam et al., “Examining influencers role in tiktok shop’s promotional strategies and consumer purchases,” Aptisi Transactions on Technopreneurship (ATT), vol. 6, no. 1, pp. 13–28, 2024.
R. Sivaraman, M.-H. Lin, M. I. C. Vargas, S. I. S. Al-Hawary, U. Rahardja, F. A. H. Al-Khafaji, E. V. Golubtsova, and L. Li, “Multi-objective hybrid system development: To increase the performance of diesel/photovoltaic/wind/battery system.” Mathematical Modelling of Engineering Problems, vol. 11, no. 3, 2024.
D. Julianingsih, A. G. Prawiyogi, E. Dolan, and D. Apriani, “Utilization of gadget technology as a learning media,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 3, no. 1, pp. 43–45, 2021.
T. Hidayat, D. Manongga, Y. Nataliani, S. Wijono, S. Y. Prasetyo, E. Maria, U. Raharja, I. Sembiring et al., “Performance prediction using cross validation (gridsearchcv) for stunting prevalence,” in 2024 IEEE International Conference on Artificial Intelligence and Mechatronics Systems (AIMS). IEEE, 2024, pp. 1–6.
M. Adela and M. Tuti, “Increasing customer repurchase intention: The significance of product quality, viral marketing, and customer experience,” APTISI Transactions on Management, vol. 8, no. 2, pp. 105– 114, 2024.
U. Rusilowati, H. R. Ngemba, R. W. Anugrah, A. Fitriani, and E. D. Astuti, “Leveraging ai for supe- rior efficiency in energy use and development of renewable resources such as solar energy, wind, and bioenergy,” International Transactions on Artificial Intelligence, vol. 2, no. 2, pp. 114–120, 2024.
R. R. T. Ayuninggati, S. V. Sihotang, M. I. Mustopa et al., “Penelitian minat ekstrakurikuler mahasiswa dalam bermusik pada pembelajaran jarak jauh di era 4.0,” Jurnal MENTARI: Manajemen, Pendidikan dan Teknologi Informasi, vol. 1, no. 2, pp. 175–186, 2023.
C. Sriliasta and V. Meilinda, “Overview of life cycle assessment of current emerging technologies,” International Transactions on Artificial Intelligence, vol. 1, no. 2, pp. 175–181, 2023.
U. Rahardja, I. D. Hapsari, P. H. Putra, and A. N. Hidayanto, “Technological readiness and its impact on mobile payment usage: A case study of go-pay,” Cogent Engineering, vol. 10, no. 1, p. 2171566, 2023.
A. Fernanda, M. Huda, and A. R. F. Geovanni, “Application of learning cloud computing technology (cloud computing) to students in higher education,” International Journal of Cyber and IT Service Management, vol. 3, no. 1, pp. 32–39, 2023.
I. Muda, R. Sivaraman, S. I. S. Al-Hawary, U. Rahardja, R. S. Bader, D. Kadarsyah, K. S. Mohsen, A. H. Jabbar, and P. Chaudhary, “Hub location-allocation in computer-based networks under disruption using whale optimization algorithm,” Industrial Engineering & Management Systems, vol. 21, no. 3, pp. 503–515, 2022.
N. K. A. Dwijendra, I. Vaslavskaya, N. V. Skvortsova, T. P. Rakhlis, U. Rahardja, M. H. Ali, A. H. Iswanto, L. Thangavelu, and M. M. Kadhim, “Application of experimental design in optimizing fuel station queuing system,” Industrial Engineering & Management Systems, vol. 21, no. 2, pp. 381–389, 2022.
X. Lin, O. Sivarak, T.-H. Chou, Y.-T. Lin, U. Rahardja, A. Ruangkanjanases, Y.-C. Lin, and S.-C. Chen, “Exploring the effect of team-environment fit in the relationship between team personality, job satisfaction, and performance,” Frontiers in Public Health, vol. 10, p. 897482, 2022.
D. Jonas, E. Maria, I. R. Widiasari, U. Rahardja, T. Wellem et al., “Design of a tam framework with emotional variables in the acceptance of health-based iot in indonesia,” ADI Journal on Recent Innovation, vol. 5, no. 2, pp. 146–154, 2024.
A. I. Setyobudi, A. Asmawati, N. Hermawati, C. T. Karisma, D. Ayu, and M. A. Alyano, “Smartpls application for evaluating cybersecurity resilience in university of raharja it infrastructure,” International Journal of Cyber and IT Service Management, vol. 4, no. 1, pp. 1–10, 2024.
O. Candra, A. Chammam, U. Rahardja, A. A. Ramirez-Coronel, A. A. Al-Jaleel, I. H. Al-Kharsan, I. Muda, G. B. Derakhshani, and M. M. Rezai, “Optimal participation of the renewable energy in microgrids with load management strategy,” Environmental and Climate Technologies, vol. 27, no. 1, pp. 56–66, 2023.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Reem Ahli, Mohd Faiz Hilmi, Anas Abudaqa
This work is licensed under a Creative Commons Attribution 4.0 International License.
This journal permits and encourages authors to post items submitted to the journal on personal websites while providing bibliographic details that credit its publication in this journal.
Authors are permitted to post their work online in institutional/disciplinary repositories or on their own websites. Pre-print versions posted online should include a citation and link to the final published version in Journal of Librarianship and Scholarly Communication as soon as the issue is available; post-print versions (including the final publisher's PDF) should include a citation and link to the journal's website.