The Impact of Artificial Intelligence in Smart City Air Purifier Systems
DOI:
https://doi.org/10.34306/att.v4i2.180Keywords:
Air Pollution, Arduino, Artificial Intelligence, YOLOAbstract
Dirty air or air pollution is one of the many natural problems that we face, the problem of harmful air pollution is very representative of a colony. If the air conditioner is not healthy so that it disturbs human health. Referring to the World Most Most Polluted Country Index, Indonesia is one of 10 countries where the air is unhealthy or polluted, requiring solutions to these natural problems. This paper aims to find solutions and minimize the impact of wider air pollution through air purification by utilizing the Artificial Intelligence mobility method, especially for outdoor areas. The problem with this system is that it provides clean air in a large area, for example, land, flats, offices, and so on, the majority of people will go out of the house and stay outside the house for a long time. Providing an intelligent sensor-based automatic drive is an advantage of this research because many air purifiers are related to the same purpose but are only explicitly made in a small room area. There are no mobility methods and no Artificial Intelligence system using the three main function formulation methods. The first formulation using "smart mobility" of the machine will be given high Artificial Intelligence. The second formulation is purification using an Arduino-based microprocessor, and the final formulation a human detector. After that, this system can be installed in residential areas and provides healthier air, referring to the structure of the formula "You Only Look Once" (YOLO). All systems will provide performance in that each function is integrated to explain the ease of this tool moves. If there is a low level of pollution, this tool will go to that place and vice versa. This tool works simultaneously, which filters air pollution & provides healthy air to humans (Artificial Intelligence). With this, the researchers tried to do several methodologies to solve air pollution outside the room and clean the dirty air to be suitable for breathing.
References
T. Hariguna, U. Rahardja, and A. Ruangkanjanases, “The impact of citizen perceived value on their intention to use e-government services: an empirical study,” Electronic Government, an International Journal, vol. 16, no. 4, pp. 426–440, 2020.
U. Rahardja, Q. Aini, M. D. A. Ngadi, M. Hardini, and F. P. Oganda, “The Blockchain Manifesto,” 2020. doi: 10.1109/ICORIS50180.2020.9320798.
B. P. Singh, V. S. Bisht, P. Bhandari, and K. S. Rawat, “Thermo-Fluidic Modelling of a Heat Exchanger Tube with Conical Shaped Insert having Protrusion and Dimple Roughness,” Aptisi Transactions on Technopreneurship (ATT), vol. 3, no. 2, pp. 127–143, 2021.
C. Lukita, M. Hatta, E. P. Harahap, and U. Rahardja, “Crowd funding management platform based on block chain technology using smart contracts,” Journal of Advanced Research in Dynamical and Control Systems, vol. 12, no. 2, 2020, doi: 10.5373/JARDCS/V12I2/S20201236.
M. Wang, M. Duan, and J. Zhu, “Research on the security criteria of hash functions in the blockchain,” in Proceedings of the 2nd ACM Workshop on Blockchains, Cryptocurrencies, and Contracts, 2018, pp. 47–55.
U. Rahardja, I. J. Dewanto, A. Djajadi, A. P. Candra, and M. Hardini, “Analysis of Covid 19 Data in Indonesia Using Supervised Emerging Patterns,” APTISI Transactions on Management (ATM), vol. 6, no. 1, pp. 91–101, 2022.
N. F. Rozy, R. Ramadhiansya, P. A. Sunarya, and U. Rahardja, “Performance Comparison Routing Protocol AODV, DSDV, and AOMDV with Video Streaming in Manet,” 2019 7th International Conference on Cyber and IT Service Management, CITSM 2019, 2019, doi: 10.1109/CITSM47753.2019.8965386.
B. Rawat, N. Mehra, A. S. Bist, M. Yusup, and Y. P. A. Sanjaya, “Quantum Computing and AI: Impacts & Possibilities,” ADI Journal on Recent Innovation, vol. 3, no. 2, pp. 202–207, 2022.
H. T. Sukmana, T. Hariguna, N. Lutfiani, and U. Rahardja, “Exploring the moderating effect of technology readiness of user intention in the context of mobile payment service,” International Journal of Advanced Trends in Computer Science and Engineering, vol. 8, no. 1.5 Special Issue, pp. 249–257, 2019, doi: 10.30534/ijatcse/2019/4481.52019.
I. Handayani, U. Rahardja, E. Febriyanto, H. Yulius, and Q. Aini, “Longer Time Frame Concept for Foreign Exchange Trading Indicator using Matrix Correlation Technique,” in 2019 Fourth International Conference on Informatics and Computing (ICIC), 2019, pp. 1–5.
A. Kumar, P. Bhandari, and K. S. Rawat, “Numerical Simulation of Solar Air Heater using Paraffin Wax-Aluminum Compound as Phase Changing Material,” Aptisi Transactions on Technopreneurship (ATT), vol. 3, no. 2, pp. 164–170, 2021.
Q. Aini, U. Rahardja, I. Handayani, M. Hardini, and A. Ali, “Utilization of google spreadsheets as activity information media at the official site alphabet incubator,” Proceedings of the International Conference on Industrial Engineering and Operations Management, no. 7, pp. 1330–1341, 2019.
W. Anggraini, “Deep Learning Untuk Deteksi Wajah Yang Berhijab Menggunakan Algoritma Convolutional Neural Network (CNN) Dengan Tensorflow.” UIN Ar-Raniry Banda Aceh, 2020.
T. Nurhikmat, “Implementasi deep learning untuk image classification menggunakan algoritma Convolutional Neural Network (CNN) pada citra wayang golek,” 2018.
Q. Aini, I. Handayani, and F. H. N. Lestari, “Utilization Of Scientific Publication Media To Improve The Quality Of Scientific Work,” Aptisi Transactions on Management (ATM), vol. 4, no. 1, pp. 1–12, 2020.
A. Alwiyah, C. Greisy, and A. Afitri, “Implementation Of Information Systems On E-commerce Websites As Media To Deliver Information,” Aptisi Transactions On Technopreneurship (ATT), vol. 1, no. 2, pp. 127–133, Aug. 2019, doi: 10.34306/att.v1i2.63.
Q. Aini, T. Hariguna, P. O. H. Putra, and U. Rahardja, “Understanding how gamification influences behaviour in education,” International Journal of Advanced Trends in Computer Science and Engineering, vol. 8, no. 1.5 Special Issue, pp. 269–274, 2019, doi: 10.30534/ijatcse/2019/4781.52019.
Q. Aini, S. Riza Bob, N. P. L. Santoso, A. Faturahman, and U. Rahardja, “Digitalization of Smart Student Assessment Quality in Era 4.0,” International Journal of Advanced Trends in Computer Science and Engineering, vol. 9, no. 1.2, pp. 257–265, Apr. 2020, doi: 10.30534/ijatcse/2020/3891.22020.
D. Apriani, A. Williams, U. Rahardja, A. Khoirunisa, and S. Avionita, “The Use of Science Technology In Islamic Practices and Rules In The Past Now and The Future,” International Journal of Cyber and IT Service Management, vol. 1, no. 1, pp. 48–64, 2021.
T. Crawford, P. Fritz, and T. Wainman, “Changes in IAQ Caused By Corona Discharge Air Cleaner.,” ASHRAE Journal, vol. 60, no. 12, pp. 64–68, 2018.
A. U. Hasanah, Y. Shino, and S. Kosasih, “The Role Of Information Technology In Improving The Competitiveness Of Small And SME Enterprises,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 3, no. 2, pp. 168–174, 2022.
B. E. Sibarani, “The Influence of Curriculum Based on the Indonesian National Qualifications Framework (KKNI) on the Quality of Student Learning (Studies on Students at the State University of Medan),” Aptisi Transactions on Technopreneurship (ATT), vol. 3, no. 2, pp. 171–180, 2021.
W. Lan, J. Dang, Y. Wang, and S. Wang, “Pedestrian detection based on YOLO network model,” in 2018 IEEE international conference on mechatronics and automation (ICMA), 2018, pp. 1547–1551.
L. Chandra, Amroni, B. Frizca, Q. Aini, and U. Rahardja, “Utilization Of Blockchain Decentralized System In Repairing Management Of Certificate Issuance System,” Journal of Advanced Research in Dynamical and Control Systems, vol. 12, no. 2, pp. 1922–1927, 2020, doi: 10.5373/JARDCS/V12I2/S20201235.
U. Rahardja, A. N. Hidayanto, T. Hariguna, and Q. Aini, “Design Framework on Tertiary Education System in Indonesia Using Blockchain Technology,” 2019 7th International Conference on Cyber and IT Service Management, CITSM 2019, pp. 5–8, 2019, doi: 10.1109/CITSM47753.2019.8965380.
Q. Aini, U. Rahardja, N. P. L. Santoso, and A. Oktariyani, “Aplikasi Berbasis Blockchain dalam Dunia Pendidikan dengan Metode Systematics Review,” CESS (Journal of Computer Engineering, System and Science), vol. 6, no. 1, pp. 58–66, 2021.
R. Supriati, E. R. Dewi, D. Supriyanti, and N. Azizah, “Implementation Framework for Merdeka Belajar Kampus Merdeka (MBKM) in Higher Education Academic Activities,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 3, no. 2, pp. 150–161, 2022.
A. S. Bist, B. Rawat, U. Rahardja, Q. Aini, and A. G. Prawiyogi, “An Exhaustive Analysis of Stress on Faculty Members Engaged in Higher Education,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 3, no. 2, pp. 126–135, 2022.
I. Faridah, F. R. Sari, T. Wahyuningsih, F. P. Oganda, and U. Rahardja, “Effect Digital Learning on Student Motivation during Covid-19,” in 2020 8th International Conference on Cyber and IT Service Management (CITSM), 2020, pp. 1–5.
N. Sany, G. K. Hanum, and S. Sutrisno, “Perancangan Aplikasi Pendeteksi Kebersihan Air Dalam Tangki Air Menggunakan Smartphone Berbasis IoT,” Technomedia Journal, vol. 4, no. 2 Februari, pp. 235–247, 2020.
M. Y. Jabarulla and H.-N. Lee, “A blockchain and artificial intelligence-based, patient-centric healthcare system for combating the COVID-19 pandemic: opportunities and applications,” in Healthcare, 2021, vol. 9, no. 8, p. 1019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Alwiyah, Sayyida, Diana Putri Lazirkha

This work is licensed under a Creative Commons Attribution 4.0 International License.
This journal permits and encourages authors to post items submitted to the journal on personal websites while providing bibliographic details that credit its publication in this journal.
Authors are permitted to post their work online in institutional/disciplinary repositories or on their own websites. Pre-print versions posted online should include a citation and link to the final published version in Journal of Librarianship and Scholarly Communication as soon as the issue is available; post-print versions (including the final publisher's PDF) should include a citation and link to the journal's website.